Orbit B-hyve Smart Hose Watering Timer Manual

Orbit B-hyve Smart Hose Watering Timer Manual

You can save time, money, and water by using the B-hyve® Smart Hose Watering Timer that has a Wi-Fi hub.

Connect using a smartphone to have complete control over how much water is applied to any area of your lawn or garden. To enhance water consumption, the timer gathers online weather information.

Only one Wi-Fi hub (Part 21006) is required; however, you can add as many faucet timers as you like. Two AA Alkaline Batteries are needed for the timer.

B-hyve regulates watering based on the characteristics of your property and the most recent high-precision local meteorological data when coupled with a Wi-Fi Hub. You can modify B-Hyve’s settings, and it will automatically adapt based on how severe the drought is where you are.

Orbit B-hyve Smart Hose Watering Timer Installation Instructions Manual

The manual is a detailed guide that gives you lots of information on how to install and use the smart hose watering timer. Get information related to its setup, installation and safety,

B-Hyve Smart Setup

Search for “B-hyve” on your smart device to find the free Android or iOS app if you don’t already have it. To start setting up the timer, create an account or sign in with an existing one.

The app has a wizard that will walk you through setting up your timer for the first time. Additionally, the program has help icons scattered throughout it that contain additional details and helpful hints.

A wizard in the B-hyve App will walk you through pairing. Select a room with Wi-Fi access that is close to the outside position of your timer for your hub. Avoid situations where there are multiple walls, a lot of mud, or large steel barriers in the way of the signal.

You will require two alkaline AA batteries to run your timer, which are not included. Install the batteries in accordance with the instructions on the tray’s drawings after removing the battery tray. Insert the battery tray into the timer firmly.

The blue light on your timer will blink five seconds in a row as it is now in pairing mode. Additionally, before turning on the water, you should hear two clicks that are spaced about 6 seconds apart; this is typical and guarantees that the valve is closed.

If you ever need to re-pair, immediately click the on/off button five times. When the timer flashes a red light every 5 seconds or when the app alerts you that batteries need to be changed, replace the batteries.

For the time and date to be set correctly after battery removal or replacement, you must reconnect to Bluetooth.

A hose tap outside should be connected to the timer. Any item that can be connected to a common hose tap can now be utilized with your timer.

Avoid installing the timer near underground valve boxes or other areas where the Bluetooth signal will be interfered with. Activate your water. The timer won’t function properly if the water is turned off.

The timer has the capacity to let you water manually without interfering with the pre-set routine. Manual can be used to test out machinery, water an area more frequently, or operate the hose tap without taking the timer off.

To start manual watering, press and hold the on/off button for 3 seconds. You can configure the duration of the preset manual cycle using the B-hyve app.

Select Preset Runtime under Settings>Devices>Device. The standard runtime is ten minutes.

Whether hand watering is taking place or a scheduled time has been set, you can always halt the water flow. To cease watering, click the on/off button once.

Manual Watering

Depending on how your timer is working, the Led indicator on your timer will change colors at different intervals.

More Info On B-Hyve Smart Hose Watering Timer

Additionally, B-hyve makes it simple to create regional watering controls. Because it is IP60 Certified and weatherproof, the B-hyve Smart Hose Watering Timer can withstand extreme weather conditions during the summer outdoors in your garden or yard.

Smart WeatherSense® automatically modifies your smart sprinkler controller based on the local weather information it receives to ensure that your plants receive the proper amount of water. It performs the job, so you may relax and take pleasure in the benefits.

Watering can be scheduled for certain times and lengths of time using programmable settings. When in smart mode, it essentially does your research for you.

Your smart hose watering timer is regularly updated with the most recent weather data so it always provides the ideal amount of watering. With the Wi-Fi hub, you can use your smartphone to manage many B-hyve Smart Hose Watering Timers.

To prevent your landscape from turning into a pool, the timer turns off in the rain. When it’s warmer, it gives out more water to keep your hydrangeas hydrated, and when it’s cooler, it gives out less water to keep your iceberg lettuce thawed.

Thanks for reading this post. By the way, we have other Orbit related blog posts which you can see here: Orbit 62100 Yard Enforcer Manual, Orbit B-Hyve Irrigation Controller Manual, Orbit 57894 user manual and Orbit 57896 sprinkler manual.

We hope the above information was useful to you in your research on the Orbit B-Hyve smart hose watering timer manual

 

Previous PostNextNext Post

Leave a Reply