The Honeywell Home RTH6360D thermostat is a 5-2 Day programmable thermostat that has quite a number of features to make your life much more easier. You may easily program the thermostat so that it will maintain the appropriate temperature and level of comfort throughout the workweek or between weekdays and weekends.
This thermostat will be able to learn your preferred heating/cooling cycle times thanks to the usage of Smart Response Learning and offer precise temperature when it’s needed. You can save total energy use by altering the chosen temperature through scheduling when you’re away or asleep. This function, when used as intended, can lower your energy costs.
The Honeywell 5-2 Day Programmable Thermostat has a backlit display that is simple to see and will provide rapid accessibility. You can choose to customize your daily routine differently from your weekend schedule with 5-2-day or 1-week programming for comfort and energy conservation. Holding settings will let you change programming as necessary.
Even after a power loss, your programming is kept in the thermostat’s memory. By using Smart Response learning, this thermostat can start learning your heating/cooling cycle and provide the ideal temperature whenever you need it.
This programmable thermostat is simple to install and set up and has automatic transition from warmth to cold and short cycle protection.
Aside from the new technology, this thermostat provides the essential functions you need. The wide, illuminated display lets you choose between Fahrenheit and Celsius and shows the current and set point temperatures as well as a real-time clock.
There are two fewer things to worry about: low battery warnings and filter replacement reminders.
Honeywell 6360D1002 Thermostat Manual
The 40 page installation manual gives you comprehensive information on how to install the thermostat.
The package includes the thermostats, screws, mounting system and the installation guide manual.
You can download the full manual from the Honeywell website, which you can also view from here.
Honeywell 6360D1002 Thermostat Troubleshooting Guide
A number of issues can crop up when using this thermostat. Its manual provides the solutions to some of the problems you may encounter. We will look at some of them here:-
Display is not lighting up – Check and ensure the batteries are installed correctly or that they are not dead. Replace if they are dead
Unable to change system setting to “Cool” – Choose the number of Cool or Compressor stages that the thermostat will control in your device. One compressor stage or a maximum of two cooling stages. If you don’t have a cool stage or compressor stage, set the value to 0.
Heating or cooling system does not respond –
Below are possible solutions to this problem.
- Verify that the setting is higher than the inside temperature.
- Make sure the thermostat is set to a lower temperature than the interior.
- Circuit breakers should be examined and reset if necessary.
- Make sure the heating and cooling system’s power switch is turned on.
- Make sure the furnace door is shut tightly.
- Wait for the system to react after five minutes.
Check out our other Honeywell thermostat manual reviews: Honeywell RTH6580WF thermostat